DYECELLS INDIA
DYECELLS INDIA
Surat, Gujarat
GST No. 24AARFD0898E1Z8
TrustSEAL Verified
Call 08048401114 39% Response Rate
SEND EMAIL

Floor Finish

We are a leading Exporter of liquid floor cleaner - densifier densifying compound and floor sealer & finish (all floor finish) from Surat, India.

Liquid Floor Cleaner - Densifier Densifying Compound

Liquid Floor Cleaner - Densifier Densifying Compound
  • Liquid Floor Cleaner - Densifier Densifying Compound
Ask For Price
Product Price :Get Latest Price

Product Details:

Packaging Size18.9 Liter (5 Gal. Pail)
Fragranceodorless
BrandBetco Corporation
Colorwater white
FormLiquid
Quantity Per Pack18.9 Liter
Shelf Life2 Years

Crete Rx Densifier contains nanoparticle silicate to better penetrate and harden honed concrete surfaces. Treated surfaces will exhibit improved abrasion and wear resistance along with improved chemical resistence. Use Crete Rx Densifier after the Honing step in restorative maintenance procedures.

Features 

  • Nanoparticle silicate chemistry 
  • Strengthens and hardens polished concrete 
  • Concrete surface exhibits improved abrasion and chemical resistance 
Directions for Use 

with a low pressure sprayer or flatmop or mop and bucket. Keep the surface wet to touch with Densifier for 15-20 minutes; reapplying Densifier in dry areas if necessary. After initial application time (15-20 minutes) allow floor to dry until it is no longer wet to touch. Do not attempt to remove excess material from floor; any unreacted material will be removed in the Polish Step.

Tech Specs  

Coverage: 2000 sq.ft./gal 
Color: Water White
Warranty: 2 years
Odor: Odorless
Appearance: Transparent
Request
Callback


Additional Information:

  • Packaging Details: 5 Gal. Pail - 18.9 Liter (1 Bucket)
Yes! I am Interested

Floor Sealer & Finish (All Floor Finish)

Product Price :Get Latest Price

Product Details:

Minimum Order Quantity2 Unit
BrandBetco Corporation
Usage/applicationAll types of floor finish
Packaging Size3.78 Liter

Acrylic Urethane Sealer - Finish

This waterbased urethane sealer and finish revolutionizes the way hard surface floors are sealed. It can be applied effortlessly over new and old concrete, slate, quarry tile, terrazzo and marble and is resistant to a variety of chemicals. Ease of maintenance is exceptional and requires no etching before application.

Features

  • Versatile - Adheres to a variety or hard surface floors.
  • Long lasting - Protection and abrasion resistance.
  • Strippable. Labor saving - High solids requires fewer coats 
Directions for Use

Recommended for use on all types of stone flooring (brick, marble, slate, terrazzo and concrete-new and old), resilient tile, quarry and non-glazed ceramic tile. 

RESTORATIVE MAINTENANCE:

Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Betco stripper label. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply finish in uniform, thin to medium coats using a clean synthetic finish mop, microfiber mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 30 - 45 minutes. Elevated temperatures, heavy coats and humidity may extend dry time. A minimum of 4 coats of finish is recommended.

ROUTINE MAINTENANCE: 

Sweep large debris and dust mop. Damp mop or automatic scrub using a Betco floor cleaner. Buff or burnish the floor to enhance gloss as needed. Use Betco One Step High Speed Cleaner/Restorer to condition the floor and extend the time between top scrub and recoating.

INTERIM MAINTENANCE:  

Sweep large debris and dust mop. Top scrub the floor using Daily Scrub SC and maroon pad to remove the top soiled layers of finish. Floor surface must be clean, dry and free of residue before finish is applied. Apply 1 – 2 coats of finish as directed above. Please recycle empty containers.

CONCRETE APPLICATION: 

May be applied to new concrete after 30 days (fully cured) and a surface temperature above 50 °F. Prior to applying sealer to new concrete, use an acidic solution to neutralize excess alkalinity. All new concrete must be cleaned and rinsed. Not for use outdoors. Old concrete must be cleaned with a degreasing solution and rinsed for proper adhesion.

GLAZED TILE/POLISHED SURFACES:  

1. Test in an inconspicuous area first, proper adhesion may be difficult due to lack of porosity.

Note: Slip resistance meets or exceeds standard, (ASTM D 2047-11) James Machine 0.5 minimum.

Tech Specs 

Color (dried film) :
 Clear
Color (liquid) : Milky white
Coverage : 1500 - 2000 square feet/gallon
Drying time : 30 - 45 minutes under normal conditions Durability : Excellent
Flash Point : None
Fragrance : Mild
Freeze/thaw stability : protect from freezing
Initial gloss : High
Leveling : Excellent
pH : 8.4 - 8.9
Recoatability : Very good
Warranty : 2 years
Request
Callback


Additional Information:

  • Delivery Time: 2-5 Days
  • Packaging Details: 1 Can = 3.78 Liter
Ask For Price
Yes! I am Interested
X

Explore More Product



Reach Us
Mr. Modi (Partner)
DYECELLS INDIA
4th FLOOR,OFFICE NO. 409,, Shubh Universal Complex, Vesu Main Road
Surat - 395007, Gujarat, India


Call Us


Send E-mailSend SMS